Rudder can steer on ground , , , - 4 CH Full RC - Aileron, Elevator, Rudder, Throttle
, - Powerful brushless motor
, - Excellent stability
, - Ready to Fly in Just Minutes!
, - Super tough
, - Lightweight
, - Shock Resistant Fuselage
, - Strong Wings
, - Pre-installed Electronics
, - Suitable for beginners and experts
, - Only required 8 AA batteries for the transmitter to start flying
, ,
This 2.4G brushless motored flying boat is an amazing looking ...
NitroTek
| Height | 190mm | | Length | 550mm | | Width | 310mm | | Wheel base | 320mm | | Track F/R | 320mm | | Ground clearance | 28mm | | Gear ratio | 8.95 | | Weight | 4300g |
, , , - 4WD, RTR, nitro powered monster truck;
, - Newly C-hub steering system. King pin axis extends to the wheel centre, this improves steering performance;
, - Newly developed suspension system, twin adjustable rear suspension modes for flexible driving mode & smooth driving mode;
, - New lightweight ultra-compact gear box with a low centre of gravity and high durability;
, - Front bumpers allow backward movement, this protects chassis from crash and jump impact;
, - 6061-T6 solid aluminum chassis, centralised chassis design to allow quicker steering and fast response;
, - Newer gear ratios, offers faster acceleration and higher speed;
, - Easy to maintain and repair pinion gearbox;
, - 16mm super big bore oil aluminum shocks;
, - All steel gears, machined motor gear, machined diff. gear;
, - Fully adjustable sway bar ball cups;
, - Hardened alum. shock tower;
, - Ultra-strength front and rear bumper;
, - High torque steering 9kg servo with metal gear;
, - Model is ball raced throughout
, ,
The ACME Barbarian NXL is a fully built, fully featured, ...
NitroTek
| Height | 230mm | | Length | 570mm | | Width | 450mm | | Wheel base | 370mm | | Track F/R | 355mm | | Ground clearance | 50mm | | Weight | 4600g |
, , , - 4WD, Brushless Power System;
, - Newly designed C-hub steering system. King pin axis extends to the wheel centre, improving steering performance;
, - Newly developed suspension system, twin adjustable rear suspension modes for flexible driving;
, - Solid aluminum chassis, centralised chassis design to get quicker steering and fast response;
, - Motor mount, not only keeps the motor cool, but also protects the motor when jumping and bashing
, - Adjustable battery holder mounts, can fit almost all stick Li-Pos available in the market;
, - Optional mechanical braking system, provides accurate deceleration and jumping control;
, - 16mm super big bore oil aluminum shocks;
, - All steel gear, machined motor gear, machined diff. gear;
, - 17mm hex alum. wheel hub;
, - Realistic All-terrain tyres with foam inserts;
, - Ultra-strong front and rear bumpers;
, - Performance-designed chrome wheel.
, - Front CVD, has all ball bearing construction
, ,
The Barbarian EXL is a fully built, top of the ...
NitroTek
| Length | 520mm | | Width | 310mm | | Height | 220mm | | Ground clearance | 75mm | | Wheelbase | 325-330mm | | Weight | 3450g |
, - Track: F:306mm, R:306mm
, - Gear ratio: C:44/13T, F/R 38/11T
, - 2.4G radio gear
, , , , - 100% factory assembled 1/8th scale race buggy
, - Full range of options/upgrades available
, - Fully fitted with precision ball bearings
, - Tuned exhaust system
, - Powerful Team Infinity .25 Engine
, - Pre-glued GS Road Spider tyres on GS dish wheels
, - Front universal drive shafts
, - Pre-painted and trimmed Kom Designs body with decals
, ,
The CL-1 is designed for those wanting ultimate performance with ...
NitroTek
| Length | 530mm | | Width | 420mm | | Height | 215mm | | Ground Clearance | 75mm | | Wheelbase | 370-375mm | | Track | F/R 330-360mm | | Gear Ratio | C 58/13T, F/R 38/11T | | Weight | 4100g |
, , , - 100% Factory Assembled 1/8th Scale Race Truggy
, - Over 50% Compatible with Storm CL-1 Series Buggies
, - Full Line of Options and Upgrade Parts Available
, - Full Precision Engineered Ball Bearings
, - Tuned .25 Exhaust System
, - Powerful Infinity Big Block .25 Rear Exhaust Engine with Pull Start
, - GS Dish Truggy Wheels with Pre-glued GS Cubic Truggy Tires
, - Front Universal Driveshafts
, - Aluminum 13mm Big Bore Oil-Filled Shocks
, - Pre-Painted and Trimmed Korn Designs Body with Decals
, - Professional 3mm Aluminum Hard-Coated Chassis
, - Adjustable 3mm Aluminum Steering Plate
, - Adjustable Servo Saver Pipe Set
, - 145cc Big Fuel Tank
, - Oversized Bearings in Front and Rear Hub System
, ,
The international race winning GS Racing is back in the ...
NitroTek
| Scale | 1/10th | | Length | 380mm | | Height | 104mm | | Ground clearance | 5.5mm | | Axle base | 260mm | | Gear ratio | 5.82 | | Race Weight | 3300g | | Radio equipment | 2.4GHz with LCD display | | F. Wheelbase | 198mm | | R. Wheelbase | 198mm |
| 0px; padding | | 0px; padding | | | 0px; padding | | | 0px; padding | | | 0px; padding | | | 0px; padding | | , ,
The EvoE is GS Racing's top of the range 1/10th ...
NitroTek
| Length | 490mm | | Height | 182mm | | Ground clearance | 22mm | | Wheelbase | 320-325mm | | Tyres | 116mm x 42mm | | Weight | 3350g | | Radio | 2.4G | | Fuel tank | 125cc |
, - Track: F:256mm (adjustable), R:251mm
, , , , - 100% factory assembled 1/8th scale race buggy
, - Over 75% compatible with Storm series buggies
, - Full range of options/upgrades available
, - Fully fitted with precision ball bearings
, - Tuned .25 exhaust system
, - Powerful Team Infinity .25 Engine
, - Pre-glued GS Road Spider tyres on GS dish wheels
, - Front universal drive shafts
, - Pre-painted and trimmed Kom Designs body with decals
, - Low centre of gravity
, - Dust guard front C-hub
, - 125cc fuel tank with filter and adjustable pressure fitting
, - Adjustable front/rear toe in and camber
, - Front, centre and rear differentials
, - 3 shoe clutch system
, - Adjustable wheelbase
, - Heavy duty suspension arms
, - 4WD shaft driven transmission
, - 46 tooth spur gear
, ,
The international race winning GS Racing is back in the ...
NitroTek
| Length | 450mm | | Width | 326mm | | Height | 150mm | | Ground clearance | 50mm | | Wheelbase | 296mm | | Track | F/R 265mm | | Weight | 2350g | | Engine | Infinity .18 rear exhaust |
, , , - 100% factory assembled 1/10th scale race buggy
, - Over 50% compatible with Shadow ST1R series truck
, - Fully fitted with precision ball bearings
, - Unique rear exhaust system
, - Powerful Team Infinity .18 Pull Start Engine
, - Pre-glued off road tyres on GS super buggy wheels
, - Pre-painted and trimmed Kom Designs body with decals
, - Front universal driveshafts
, - Long travel, coil over, impact absorbing oil filled shocks.
, - 4WD transmission with center slipper clutch
, - GS high performance crown gear and pinion gear made of powder metallurgy steel
, - GS "Competition Line" high quality race differential gears
, ,
The international race winning GS Racing is back in the ...
NitroTek
| Length | 490mm | | Width | 230mm | | Height | 210mm | | Ground clearance | 29mm | | Wheelbase | 304mm | | Weight | 2350g | | Gear ratio | C47/13T, F/R |
, - Track: F: 198mm R: 200mm
, - 2.4G radio gear
, , , , - 100% factory assembled 1/8th scale race buggy
, - Over 50% compatible with Shadow SB1 series Buggy
, - Fully fitted with precision ball bearings
, - Tuned rear exhaust system
, - Powerful Team Infinity .18 Pull Start Engine
, - GS 1/9th Pre-glued rally wheels on Mitsubishi Pajero Wheels
, - Pre-painted and trimmed Kom Designs body with decals
, - Front Universal driveshafts
, - All new design GS rally car suspension system
, - Front and rear sway bar system
, - GS "Competition Line" high quality race differential gears
, - GS high performance crown gear and pinion gear made of powder metallurgy steel
, - 4WD transmission with center slipper clutch
, ,
This is a real innovation from GS and is a ...
NitroTek
| Length | 430mm | | Width | 330mm | | Height | 155mm | | Ground clearance | 28mm | | Wheelbase | 295mm | | Track | F/R 265mm | | Weight | 2213.8g |
, - 2.4G radio gear
, - 75cc fuel tank
, , , , - 100% factory assembled 1/10th scale truck
, - Over 50% compatible with Shadow ST1R series truck
, - Fully fitted with precision ball bearings
, - Tuned .18 exhaust system
, - Powerful Team Infinity .18 Pull Start Engine
, - Pre-glued off road tyres on GS super truggy wheels
, - Pre-painted and trimmed Kom Designs body with decals
, - Front Universal driveshafts
, - Long travel impact absorbing oil filled shocks
, - 4wd transmission with centre slipper clutch
, - Front/rear sealed gear diffs
, - Ultra thick and durable suspension arms with capture hinge pins
, - Low profile radio tray
, - Taiwan high quality build and components
, ,
The GS Racing ST1 comes packed with features such as ...
NitroTek
| Scale | 1/8th | | Length | 510mm | | Height | 200mm | | Ground clearance | 60mm | | Axle Base | 326-330mm | | F. Wheelbase | 305mm | | R. Wheel Base | 307mm | | Gear Ratio | 10.5 | | Race Weight | 3600g |
| 0px; padding | | 0px; padding | | | 0px; padding | | | 0px; padding | | | 0px; padding | | | 0px; padding | |
, , ,
Leaving behind old traditions and taking buggy design to a ...
RCTimer
| Specs | 1.Weight | | 2.Working volts | 4.8V-6V | | 3.Loading current | 7mA(4.8V) | | 4.Precision scope | <0.3% | | 5.Dimension | 40mm x 21mm x 8.5mm | | Requires | Connect fail-safe unit to throttle/brake servo and receiver. |
Features:, Low battery warning.,
1.Features RCTimer Fail safe to suit all nitro & petrol ...
RCTimer
| * Weight | C55g | | *Size | 41.0 x 20.1 x 38.0mm | | *Operating Speed | 0.16sec/60o | | *Stall Torque | 13 kg/cm | | *Operating Voltage | 5-7.2 Volts | | Application | Great for gas or electric .20-1.20 size airplanes, |
55g RCT213 Metal Geared Standard Servo *Model. RCT0213MG Feature Metal ...
RCTimer
| * Weight | A55g | | *Size | 41.0 x 20.1 x 38.0mm | | *Operating Speed | 0.16sec/60o | | *Stall Torque | 9 kg/cm | | *Operating Voltage | 5-7.2 Volts | | Application | Great for gas or electric .20-1.20 size airplanes, |
55g RCT0211MG Metal Geared Standard Servo *Model. RC0211MG Feature Metal ...
RCTimer
| Dimension | 41*20*36 mm | | Weight | 37.2g | | Stall torque | 4.1kg/cm (6v) | | Operating speed | 0.23sec/60°(4.8v) | | Operating voltage | 4.8-6V |
This servo is like the S3003 Standard Servo. This basic ...
BevRC
DPCAV
Hobby-Lobby
HobbyKing
LowPriceRC
ngHobbies
NitroTek
R2Hobbies
RangeVideo
RCTimer
ReadyMadeRC
HobbyWireless
RCPlanet
HorizonHobby
HiModel
OFM
GetFPV
AMainHobbies
SDSHobby
GoodLuckBuy
Flying-Hobby
|
|